Contact Us

Address

8 Hautonga St, Petone, Lower Hutt 5012,Wellington,New Zealand

Follow Us





This is a Heidenhain query

Terms & Conditions

1. Terms of Trade

1.1 The terms and conditions set out below apply to every supply of Goods and Services made by Llama Engineering to the Customer. By placing an Order with Llama Engineering the Customer agrees that it is bound by these Terms of Trade and that the Customer’s own terms and conditions do not apply.

1.2 Where the Customer has entered into a separate written supply agreement with Llama Engineering, these Terms shall also apply except to the extent that there is any inconsistency between these Terms and the separate supply agreement, in which case the relevant provisions of the supply agreement shall prevail.

DEFINITIONS

  • “Llama Engineering” shall mean Llama Engineering Limited, or any agents or employees thereof.
  • Credit Account means the account for purchasing goods on credit held by the Customer with Llama Engineering.
  • Customer means the person who purchases Goods or Services from Llama Engineering, and includes the Customers’ employees, contractors, subcontractors and agents. Where the Customer comprises two or more persons, means those persons jointly and severally.
  • Goods means any goods provided and/or manufactured by Llama Engineering.
  • PPSA means the Personal Property Securities Act 1999.
  • Order means an agreement between Llama Engineering and the Customer for Llama Engineering to supply Goods and/or Services to the Customer.
  • Quote means a written offer from Llama Engineering to the Customer to supply Goods and/or
  • Services for a specified price subject to the terms and conditions of such offer.
  • Services means any services performed by Llama Engineering.
  • Terms means the terms and conditions of the supply set out in this document, including any variation to these Terms “Products” shall mean:
    • all Products of the general description specified on the front of this agreement and supplied by Llama Engineering to the Customer; and
    • all Products supplied by Llama Engineering to the Customer; and
    • all inventory of the Customer that is supplied by Llama Engineering; and
    • all Products supplied by Llama Engineering and further identified in any invoice issued by Llama Engineering to the Customer, which invoices are deemed to be incorporated into and form part of this agreement; and
    • all Products that are marked as having been supplied by Llama Engineering or that are stored by the Customer in a manner that enables them to be identified as having been supplied by Llama Engineering; and
    • all of the Customer’s present and after-acquired Products that Llama Engineering has performed work on or to or in which goods or materials supplied or financed by Llama Engineering have been attached or incorporated.
    • The above descriptions may overlap but each is independent of and does not limit the others.
  • 4 “Products and Services” shall mean all products, goods, services and advice provided by Llama Engineering to the Customer and shall include without limitation the design and supply of manufactured products and metal processing services and all advice and services and all charges for labour, hire charges, insurance charges, or any fee or charge associated with the supply of Products and Services by Llama Engineering to the Customer.
  • 5 “Price” shall mean the cost of the Products and Services as agreed between Llama Engineering and the Customer and includes all disbursements eg charges Llama Engineering pay to others on the Customer’s behalf subject to clause 4 of this contract.

2. ACCEPTANCE

2.1 Any instructions received by Llama Engineering from the Customer for the supply of Products and Services shall constitute a binding contract and acceptance of the terms and conditions contained herein.

3. COLLECTION AND USE OF INFORMATION

3.1 The Customer authorises Llama Engineering to collect, retain and use any information about the Customer, for the purpose of assessing the Customer’s credit worthiness, enforcing any rights under this contract, or marketing any Products and Services provided by Llama Engineering to any other party.

3.2 The Customer authorises Llama Engineering to disclose any information obtained to any person for the purposes set out in clause 3.1.

3.3 Where the Customer is a natural person the authorities under clauses 3.1 and 3.2 are authorities or consents for the purposes of the Privacy Act 1993.

4. PRICE

4.1 Where no price is stated in writing or agreed to orally the Products and Services shall be deemed to be sold at the current amount as such Products and Services are sold by Llama Engineering at the time of the contract.

4.2 The price may be increased by the amount of any reasonable increase in the cost of supply of the Products and Services that is beyond the control of Llama Engineering between the date of the contract and delivery of the Products and Services.

5. PAYMENT

5.1 Unless otherwise agreed payment for Products and Services shall be made in full on or before the 20th day of the month following the date of the invoice (“the due date”).

5.2 Interest may be charged on any amount owing after the due date at the rate of 2.5% per month or part month.

5.3 Any expenses, disbursements and legal costs incurred by Llama Engineering in the enforcement of any rights contained in this contract shall be paid by the Customer, including any reasonable solicitor’s fees or debt collection agency fees.

5.4 Receipt of a cheque, bill of exchange, or other negotiable instrument shall not constitute payment until such negotiable instrument is paid in full.

6. QUOTATION

6.1 Where a quotation is given by Llama Engineering for Products and Services:

6.1.1 Unless otherwise agreed the quotation shall be valid for thirty (30) days from the date of issue; and

6.1.2 The quotation shall be exclusive of goods and services tax unless specifically stated to the contrary;

6.1.3 Llama Engineering reserve the right to alter the quotation because of circumstances beyond its control such as raw material price stability and currency variation.

6.2 Where Products and Services are required in addition to the quotation the Customer agrees to pay for the additional cost of such Products and Services.

7. RISK

7.1 Any Products and Services remain at Llama Engineering’ risk until delivery to the Customer.

7.2 Delivery of Products shall be deemed complete when Llama Engineering gives possession of the Products directly to the Customer or possession of the Products is given to a carrier, courier, or other bailee for purposes of transmission to the Customer.

8. AGENCY

8.1 The Customer authorises Llama Engineering to contract either as principal or agent for the provision of Products and Services that are the matter of this contract.

8.2 Where Llama Engineering enters into a contract of the type referred to in clause 8.1 it shall be read with and form part of this agreement and the Customer agrees to pay any amounts due under that contract.

9. TITLE AND SECURITY (PERSONAL PROPERTY SECURITIES ACT 1999)

9.1 Title in any Products supplied by Llama Engineering passes to the Customer only when the Customer has made payment in full for all Products provided by Llama Engineering and of all other sums due to Llama Engineering by the Customer on any account whatsoever. Until all sums due to Llama Engineering by the Customer have been paid in full, Llama Engineering has a security interest in all Products.

9.2 If the Products are attached, fixed, or incorporated into any property of the Customer, by way of any manufacturing or assembly process by the Customer or any third party, title in the Products shall remain with Llama Engineering until the Customer has made payment for all Products, and where those Products are mixed with other property so as to be part of or a constituent of any new Products, title to these new Products shall deemed to be assigned to Llama Engineering as security for the full satisfaction by the Customer of the full amount owing between Llama Engineering and Customer.

9.3 The Customer gives irrevocable authority to Llama Engineering to enter any premises occupied by the Customer or on which Products are situated at any reasonable time after default by the Customer or before default if Llama Engineering believes a default is likely and to remove and repossess any Products and any other property to which Products are attached or in which Products are incorporated. Llama Engineering shall not be liable for any costs, damages, expenses or losses incurred by the Customer or any third party as a result of this action, nor liable in contract or in tort or otherwise in any way whatsoever unless by statute such liability cannot be excluded. Llama Engineering may either resell any repossessed Products and credit the Customer’s account with the net proceeds of sale (after deduction of all repossession, storage, selling and other costs) or may retain any repossessed Products and credit the Customer’s account with the invoice value thereof less such sum as Llama Engineering reasonably determines on account of wear and tear, depreciation, obsolescence, loss or profit and costs.

9.4 Where Products are retained by Llama Engineering pursuant to clause 9.3 the Customer waives the right to receive notice under s.120 of the Personal Property Securities Act 1999 (“PPSA”) and to object under s.121 of the PPSA.

9.5 The following shall constitute defaults by the Customer:

9.5.1 Non payment of any sum by the due date.

9.5.2 The Customer intimates that it will not pay any sum by the due date.

9.5.3 Any Products are seized by any other creditor of the Customer or any other creditor intimates that it intends to seize Products.

9.5.4 Any Products in the possession of the Customer are materially damaged while any sum due from the Customer to Llama Engineering remains unpaid.

9.5.5 The Customer is bankrupted or put into liquidation or a receiver is appointed to any of the Customer’s assets or a landlord distains against any of the Customer’s assets.

9.5.6 A Court judgment is entered against the Customer and remains unsatisfied for seven (7) days.

9.5.7 Any material adverse change in the financial position of the Customer.

10. SECURITY INTEREST FOR SERVICE PROVIDERS

10.1 The Customer gives Llama Engineering a security interest in all of the Customer’s present and after-acquired property that Llama Engineering has performed services on or to or in which goods or materials supplied or financed by Llama Engineering have been attached or incorporated.

11. GENERAL LIEN

11.1 The Customer agrees that Llama Engineering may exercise a general lien against any Products and Services or property belonging to the Customer that is in the possession of Llama Engineering for all sums outstanding under this contract and any other contract to which the Customer and Llama Engineering are parties.

11.2 If the lien is not satisfied within seven (7) days of the due date Llama Engineering may, having given notice of the lien at its option either:

11.2.1 Remove such Products and Services and store them in such a place and in such a manner as Llama Engineering shall think fit and proper and at the risk and expense of the Customer; or

11.2.2 Sell such Products and Services or part thereof upon such terms as it shall think fit and apply the proceeds in or towards discharge of the lien and costs of sale without being liable to any person for damage caused.

12. DISPUTES

12.1 No claim relating to Products and Services will be considered unless 13made within seven (7) days of delivery.

13. LIABILITY

13.1 The Consumer Guarantees Act 1993, the Fair Trading Act 1986 and other statutes may imply warranties or conditions or impose obligations upon Llama Engineering which cannot by law (or which can only to a limited extent by law) be excluded or modified. In respect of any such implied warranties, conditions or terms imposed on Llama Engineering, Llama Engineering’ liability shall, where it is allowed, be excluded or if not able to be excluded only apply to the minimum extent required by the relevant statute. 13.2 Except as otherwise provided by clause

13.1 Llama Engineering shall not be liable for:

13.2.1 Any loss or damage of any kind whatsoever, arising from the supply of Products and Services by Llama Engineering to the Customer (including any damage to the Customer’s property caused during the treatment process or at any time such property is in the possession of Llama Engineering) and including consequential loss whether suffered or incurred by the Customer or another person and whether in contract or tort (including negligence) or otherwise and irrespective of whether such loss or damage arises directly or indirectly from Products and Services provided by Llama Engineering to the Customer; and

13.2.2 The Customer shall indemnify Llama Engineering against all claims and loss of any kind whatsoever however caused or arising and without limiting the generality of the foregoing of this clause whether caused or arising as a result of the negligence of Llama Engineering or otherwise, brought by any person in connection with any matter, act, omission, or error by Llama Engineering its agents or employees in connection with the Products and Services.

13.2.3 Any claims where property has been stolen, damaged or altered from the state it was received whilst in a Llama Engineering facility, provided Llama Engineering has acted with reasonable care and skill

14. WARRANTY

14.1 Manufacturer’s warranty applies where applicable.

14.2 Any written warranty that Llama Engineering provide to the Customer will also form part of these terms and conditions of trade.

14.3 Llama Engineering warrants that services performed and any other incidental work to be performed by Llama Engineering will be conducted in a good and workmanlike manner and in accordance with any agreed specifications supplied by the Customer.

15. PERSONAL GUARANTEE OF COMPANY DIRECTORS OR TRUSTEES

15.1 If the Customer is a company or trust, the director(s) or trustee(s) signing this contract, in consideration for Llama Engineering agreeing to supply Goods and grant credit to the Customer at their request, also sign this contract in their personal capacity and jointly and severally personally undertake as principal debtors to Llama Engineering the payment of any and all monies now or hereafter owed by the Customer to Llama Engineering and indemnify Llama Engineering against non-payment by the Customer. Any personal liability of a signatory hereto shall not exclude the Customer in any way whatsoever from the liabilities and obligations contained in this contract. The signatories and Customer shall be jointly and severally liable under the terms and conditions of this contract and for payment of all sums due hereunder.

16. COPYRIGHT AND INTELLECTUAL PROPERTY

16.1 Llama Engineering, owns and has copyright in all work, software, systems, solutions, drawings, designs, specifications, electronic data and documents produced by Llama Engineering in connection with the Products and Services provided pursuant to this contract and the client may use the Products and Services only if paid for in full and for the purpose for which they were intended and supplied by Llama Engineering.

16.2 Where Llama Engineering has followed a design or instruction furnished by or given by the Customer, the Customer shall indemnify Llama Engineering against all damages, penalties, costs and expenses of Llama Engineering or in respect of which Llama Engineering may become liable through any work required to be done in accordance with these instructions involving an infringement of a patent, trademark, registered design or common law right.

17. CONSUMER GUARANTEES ACT

17.1 The guarantees contained in the Consumer Guarantees Act 1993 are excluded where the Customer acquires Products and Services from Llama Engineering for the purposes of a business in terms of section 2 and 43 of that Act.

18. MISCELLANEOUS

18.1 Llama Engineering shall not be liable for delay or failure to perform its obligations if the cause of the delay or failure is beyond its control.

18.2 Failure by Llama Engineering to enforce any of the terms and conditions contained in this contract shall not be deemed to be a waiver of any of the rights or obligations Llama Engineering has under this contract.

18.3 If any provision of this contract shall be invalid, void or illegal or unenforceable the validity existence, legality and enforceability of the remaining provisions shall not be affected, prejudiced or impaired.